IMPERIAL BRAND PLA+ CARBON FIBER 3D Printer Filament 1.75mm 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.02

Save $10.00
Imperial Data SupplySKU: IMPPLA+CARBONFIBER

Price:
Sale price$32.99 Regular price$42.99

Description

IMPERIAL BRAND PLA+ CARBON FIBER 3D Printer Filament 1.75mm 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.02 PLA+ is a variation of PLA that has added material in order to make the filament less brittle, have a smoother surface finish, and less likely to absorb moisture. Typically, TPU is added into the filament in order to achieve this property. PLA+ will have the feel and functionality of ABS without the smell. If you didn’t know better, you would think it was ABS. We suggest printing with PLA+ at 190 to 210 degrees Celsius and with a bed temperature of 45 degrees Celsius. PLA+ responds very well to blue painter’s tape and a glue stick to hold properly and not peel up when printing. PLA+ Advantages: Blended with special biodegradable bio-polyesters. High rigidity. Good Glossiness. Several times tougher than regular PLA. Smoother finished printouts. No cracking or brittle problem. Elongation At Break: PLA+ 29% Regular PLA 5% Izod Impact Strength: PLA+ 7KJ/m2 Regular PLA 4.2KJ/m2 Net Weight: 1 KG Printing Parameters Best Printing Temperature:190 -210℃ Bed Temperature:0/65℃ Printing Speed:30~90mm/s Movement Speed :90~150mm/s Non harmful ,non-toxic, and environment friendly Low material shrinkage rate, uniform diameter +/- 0.02mm Greater selection of colors to choose from. Bio-Degradable Guaranteed Customer Satisfaction
Carbon Fiber reinforced PLA + with short chopped Carbon Fibers. It is designed to be stiff, or to resist bending. It is the stiffest material most offer and makes parts with an incredibly solid feel. When printed, this material is a dark glossy black that glitters slightly in direct light from the fine chopped fibers reflecting the light.
Carbon Fiber Reinforced PLA + does not require a heated bed and prints much like unreinforced PLA + filament. We have had good results printing at 190C-210C using a .5mm nozzle and direct-drive spring loaded pinch-roll style extrusion head. Layer adhesion is excellent and the material has low warpage.

You may also like

Recently viewed