Ink & Toner Finder
Description
IMPERIAL BRAND PLA+ GREEN 3D Printer Filament 1.75mm 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.02
PLA+ is a variation of PLA that has added material in order to make the filament less brittle, have a smoother surface finish, and less likely to absorb moisture. Typically, TPU is added into the filament in order to achieve this property. PLA+ will have the feel and functionality of ABS without the smell. If you didn’t know better, you would think it was ABS. We suggest printing with PLA+ at 180 to 200 degrees Celsius and with a bed temperature of 45 degrees Celsius. PLA+ responds very well to blue painter’s tape and a glue stick to hold properly and not peel up when printing. PLA+ Advantages: Blended with special biodegradable bio-polyesters. High rigidity. Good Glossiness. Several times tougher than regular PLA. Smoother finished printouts. No cracking or brittle problem. Elongation At Break: PLA+ 29% Regular PLA 5% Izod Impact Strength: PLA+ 7KJ/m2 Regular PLA 4.2KJ/m2 Net Weight: 1 KG Printing Parameters Best Printing Temperature：180-200℃ Bed Temperature：0/65℃ Printing Speed：30~90mm/s Movement Speed ：90~150mm/s Non harmful ,non-toxic, and environment friendly Low material shrinkage rate, uniform diameter +/- 0.02mm Greater selection of colors to choose from. Bio-Degradable Guaranteed Customer Satisfaction
PLA+ is a variation of PLA that has added material in order to make the filament less brittle, have a smoother surface finish, and less likely to absorb moisture. Typically, TPU is added into the filament in order to achieve this property. PLA+ will have the feel and functionality of ABS without the smell. If you didn’t know better, you would think it was ABS. We suggest printing with PLA+ at 180 to 200 degrees Celsius and with a bed temperature of 45 degrees Celsius. PLA+ responds very well to blue painter’s tape and a glue stick to hold properly and not peel up when printing. PLA+ Advantages: Blended with special biodegradable bio-polyesters. High rigidity. Good Glossiness. Several times tougher than regular PLA. Smoother finished printouts. No cracking or brittle problem. Elongation At Break: PLA+ 29% Regular PLA 5% Izod Impact Strength: PLA+ 7KJ/m2 Regular PLA 4.2KJ/m2 Net Weight: 1 KG Printing Parameters Best Printing Temperature：180-200℃ Bed Temperature：0/65℃ Printing Speed：30~90mm/s Movement Speed ：90~150mm/s Non harmful ,non-toxic, and environment friendly Low material shrinkage rate, uniform diameter +/- 0.02mm Greater selection of colors to choose from. Bio-Degradable Guaranteed Customer Satisfaction