Wood filaments are PLA+ based, but the wood is integrated in the form of wooden fibers.
Our wood filament contains 70% PLA+ and 30% wooden fibers
Despite this seemingly low fraction of wood, we guarantee you’ll be impressed with just how wood-like the resulting prints feel. From texture to smell, everything feels very real. This means wood 3D printed parts can be treated as real wood. In other words, it’s safe to sand the parts and apply different paints and coatings.
One thing to keep in mind that you might not be aware of is the smell of melting wood filaments. During printing, it basically smells like burning wood. So be sure to have proper ventilation and to stay out of the room during the whole print. You don’t want to breathe in the fumes!
PLA+ is a variation of PLA that has added material in order to make the filament less brittle, have a smoother surface finish, and less likely to absorb moisture. Typically, TPU is added into the filament in order to achieve this property. PLA+ will have the feel and functionality of ABS without the smell. If you didn’t know better, you would think it was ABS. We suggest printing with PLA+ at 180 to 200 degrees Celsius and with a bed temperature of 45 degrees Celsius. PLA+ responds very well to blue painter’s tape and a glue stick to hold properly and not peel up when printing.
Blended with special biodegradable bio-polyesters.
High rigidity. Good Glossiness.
Several times tougher than regular PLA.
Smoother finished printouts.
No cracking or brittle problem.
Elongation At Break: PLA+ 29% Regular PLA 5%
Izod Impact Strength: PLA+ 7KJ/m2 Regular PLA 4.2KJ/m2
Net Weight: 1 KG
Best Printing Temperature：180 -200℃
Movement Speed ：90~150mm/s
Non harmful ,non-toxic, and environment friendly
Low material shrinkage rate, uniform diameter +/- 0.02mm
Greater selection of colors to choose from.
Guaranteed Customer Satisfaction